W13-24P1 Rotek Slewing Ring Bearings
| Brand Name: | Rotek |
| Model Number: | W13-24P1 |
| Category: | Mounted Units & Inserts |
| Inventory: | 0.0 |
| Minimum Buy Quantity: | N/A |
| Weight: | 62 |
| Product Group: | M06110 |
| inside diameter:: | 160 mm, 6.5000 in, 6.4375 in |
| compatible bore diameter:: | 160 mm, 6.5000 in, 6.4375 in |
| base to bore centerline:: | 170 mm |
Product Details
| Category | Mounted Units & Inserts |
| Inventory | 0.0 |
| Minimum Buy Quantity | N/A |
| Weight | 62 |
| Product Group | M06110 |
| inside diameter: | 160 mm, 6.5000 in, 6.4375 in |
| compatible bore diameter: | 160 mm, 6.5000 in, 6.4375 in |
| base to bore centerline: | 170 mm |
| housing material: | Cast Iron |
| overall length: | 510 mm |
| compatible bearing type: | Spherical Roller |
| overall height: | 333 mm |
| finish/coating: | Uncoated |
| overall width: | 230 mm |
| compatible bearing series/part number: | 23036CCK/W33, C3036 K |
| mounting: | Four-Bolt Base |
| series: | SNLN |
| housing construction: | Split Pillow Block |
| standards met: | ISO/DIS 185 Grade 200 |
| Locating ring | 2 x FRB 10/280 |
| da | 180 mm |
| db | 195 mm |
| Ca | 94 mm |
| Da | 280 mm |
| A | 225 mm |
| A1 | 160 mm |
| H | 342 mm |
| H1 | 170 mm |
| H2 | 60 mm |
| J | 470 mm |
| L | 550 mm |
| N | 42 mm |
| N1 | 35 mm |
| ba | 69 mm |
| bc | 94 mm |
| J6 | 506 mm |
| J7 | 58 mm |
| N4 max. | 12 mm |
| A2L | 10.5 mm |
| A2T | 33.5 mm |
| P55° | 1160 kN |
| P90° | 700 kN |
| P120° | 520 kN |
| P150° | 460 kN |
| P180° | 580 kN |
| Pa | 200 kN |
| Q120° | 900 kN |
| Q150° | 520 kN |
| Q180° | 450 kN |
| Mass housing | 58.5 kg |
| Cap bolt, size | M 24 x 130 |
| Cap bolt, rec. tightening torque | 350 N·m |
| Appropriate attachment bolt, size G | 30 mm |
| Appropriate attachment bolt, rec. tightening torque | 1310 N·m |
| Eye bolt, size | M12 |
| Initial grease fill, 20% | 950 g |
| Initial grease fill, 40% | 1800 g |