Ready to Ship thrust roller bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
No. | Brand | H | B | s | h | A | C | T | |
29424 | NTN | - | - | - | - | - | 74 mm | 975 kN | 78 mm |
29424 E | SKF | - | 78 mm | 50.5 mm | 74 mm | - | - | 36.5 mm | - |
29424 M | Loyal | - | - | - | - | - | - | 1170 kN | 78 mm |
29424-E1 | FAG | 30 ° | - | - | - | - | 74 mm | - | 78 mm |
29424-M | NKE | - | 78 mm | - | - | 37 mm | 74 mm | 934 kN | - |
29424E | NACHI | - | - | 29 mm | - | - | 74 mm | 1030 kN | 78 mm |
29424EX | NACHI | - | - | 54 mm | - | - | 74 mm | 1210 kN | 78 mm |
29424R | KOYO | - | - | 29 mm | - | - | 74 mm | 1040 kN | 78 mm |
29424 E/VQ096 | SKF | - | - | - | - | - | - | - | - |
29424M | NSK | - | - | - | - | - | - | - | - |
29424RN FY | KOYO | - | - | - | - | - | - | - | - |
NKE 29344-M thrust roller bearings | Series:28000; Cone Part Number:28159; Cup Part Number:28300X; Design Units:Imperial; Bearing Weight:0.4 Kg; Cage Type:Stamped Steel; d:39.980 mm; D:76.2 mm; B - Cone Width:20.940 mm; C - Cup Width:15.494 mm; B:20.622 mm; R - Cone Backface To Clear Radius1:3.560 mm; r - Cup Backface To Clear Radius2:1.52 mm; da - Cone Frontface Backing Diameter:44.96 mm; db - Cone Backface Backing Diameter:52.07 mm; Da - Cup Frontface Backing Diameter:71.88 mm; Db - Cup Backface Backing Diameter:68.07 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Aa - Cage-Cone Backface Clearance:1.5 mm; a - Effective Center Location3:-4.8 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3700 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:14300 lbf; C0 - Static Radial Rating:15500 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2550 lbf; K - Factor7:1.45; e - ISO Factor8:0.4; Y - ISO Factor9:1.49; G1 - Heat Generation Factor (Roller-Raceway):20.7; G2 - Heat Generation Factor (Rib-Roller End):12.5; Cg - Geometry Factor:0.0709; |
NTN MX-RE3621V thrust roller bearings | Series:28000; Cone Part Number:28159; Cup Part Number:28300X; Design Units:Imperial; Bearing Weight:0.4 Kg; Cage Type:Stamped Steel; d:39.980 mm; D:76.2 mm; B - Cone Width:20.940 mm; C - Cup Width:15.494 mm; B:20.622 mm; R - Cone Backface To Clear Radius1:3.560 mm; r - Cup Backface To Clear Radius2:1.52 mm; da - Cone Frontface Backing Diameter:44.96 mm; db - Cone Backface Backing Diameter:52.07 mm; Da - Cup Frontface Backing Diameter:71.88 mm; Db - Cup Backface Backing Diameter:68.07 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Aa - Cage-Cone Backface Clearance:1.5 mm; a - Effective Center Location3:-4.8 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3700 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:14300 lbf; C0 - Static Radial Rating:15500 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2550 lbf; K - Factor7:1.45; e - ISO Factor8:0.4; Y - ISO Factor9:1.49; G1 - Heat Generation Factor (Roller-Raceway):20.7; G2 - Heat Generation Factor (Rib-Roller End):12.5; Cg - Geometry Factor:0.0709; |
600 mm x 1030 mm x 92 mm KOYO 294/600 thrust roller bearings | Series:28000; Cone Part Number:28159; Cup Part Number:28300X; Design Units:Imperial; Bearing Weight:0.4 Kg; Cage Type:Stamped Steel; d:39.980 mm; D:76.2 mm; B - Cone Width:20.940 mm; C - Cup Width:15.494 mm; B:20.622 mm; R - Cone Backface To Clear Radius1:3.560 mm; r - Cup Backface To Clear Radius2:1.52 mm; da - Cone Frontface Backing Diameter:44.96 mm; db - Cone Backface Backing Diameter:52.07 mm; Da - Cup Frontface Backing Diameter:71.88 mm; Db - Cup Backface Backing Diameter:68.07 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Aa - Cage-Cone Backface Clearance:1.5 mm; a - Effective Center Location3:-4.8 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3700 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:14300 lbf; C0 - Static Radial Rating:15500 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2550 lbf; K - Factor7:1.45; e - ISO Factor8:0.4; Y - ISO Factor9:1.49; G1 - Heat Generation Factor (Roller-Raceway):20.7; G2 - Heat Generation Factor (Rib-Roller End):12.5; Cg - Geometry Factor:0.0709; |
INA K89428-M thrust roller bearings | Series:28000; Cone Part Number:28159; Cup Part Number:28300X; Design Units:Imperial; Bearing Weight:0.4 Kg; Cage Type:Stamped Steel; d:39.980 mm; D:76.2 mm; B - Cone Width:20.940 mm; C - Cup Width:15.494 mm; B:20.622 mm; R - Cone Backface To Clear Radius1:3.560 mm; r - Cup Backface To Clear Radius2:1.52 mm; da - Cone Frontface Backing Diameter:44.96 mm; db - Cone Backface Backing Diameter:52.07 mm; Da - Cup Frontface Backing Diameter:71.88 mm; Db - Cup Backface Backing Diameter:68.07 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Aa - Cage-Cone Backface Clearance:1.5 mm; a - Effective Center Location3:-4.8 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3700 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:14300 lbf; C0 - Static Radial Rating:15500 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2550 lbf; K - Factor7:1.45; e - ISO Factor8:0.4; Y - ISO Factor9:1.49; G1 - Heat Generation Factor (Roller-Raceway):20.7; G2 - Heat Generation Factor (Rib-Roller End):12.5; Cg - Geometry Factor:0.0709; |
SNR 23220EAW33 thrust roller bearings | Series:28000; Cone Part Number:28159; Cup Part Number:28300X; Design Units:Imperial; Bearing Weight:0.4 Kg; Cage Type:Stamped Steel; d:39.980 mm; D:76.2 mm; B - Cone Width:20.940 mm; C - Cup Width:15.494 mm; B:20.622 mm; R - Cone Backface To Clear Radius1:3.560 mm; r - Cup Backface To Clear Radius2:1.52 mm; da - Cone Frontface Backing Diameter:44.96 mm; db - Cone Backface Backing Diameter:52.07 mm; Da - Cup Frontface Backing Diameter:71.88 mm; Db - Cup Backface Backing Diameter:68.07 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Aa - Cage-Cone Backface Clearance:1.5 mm; a - Effective Center Location3:-4.8 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3700 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:14300 lbf; C0 - Static Radial Rating:15500 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2550 lbf; K - Factor7:1.45; e - ISO Factor8:0.4; Y - ISO Factor9:1.49; G1 - Heat Generation Factor (Roller-Raceway):20.7; G2 - Heat Generation Factor (Rib-Roller End):12.5; Cg - Geometry Factor:0.0709; |
NBS K81215TN thrust roller bearings | Series:28000; Cone Part Number:28159; Cup Part Number:28300X; Design Units:Imperial; Bearing Weight:0.4 Kg; Cage Type:Stamped Steel; d:39.980 mm; D:76.2 mm; B - Cone Width:20.940 mm; C - Cup Width:15.494 mm; B:20.622 mm; R - Cone Backface To Clear Radius1:3.560 mm; r - Cup Backface To Clear Radius2:1.52 mm; da - Cone Frontface Backing Diameter:44.96 mm; db - Cone Backface Backing Diameter:52.07 mm; Da - Cup Frontface Backing Diameter:71.88 mm; Db - Cup Backface Backing Diameter:68.07 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Aa - Cage-Cone Backface Clearance:1.5 mm; a - Effective Center Location3:-4.8 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3700 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:14300 lbf; C0 - Static Radial Rating:15500 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2550 lbf; K - Factor7:1.45; e - ISO Factor8:0.4; Y - ISO Factor9:1.49; G1 - Heat Generation Factor (Roller-Raceway):20.7; G2 - Heat Generation Factor (Rib-Roller End):12.5; Cg - Geometry Factor:0.0709; |
140,000 mm x 210,000 mm x 53 mm SNR 23028EMKW33 thrust roller bearings | Series:28000; Cone Part Number:28159; Cup Part Number:28300X; Design Units:Imperial; Bearing Weight:0.4 Kg; Cage Type:Stamped Steel; d:39.980 mm; D:76.2 mm; B - Cone Width:20.940 mm; C - Cup Width:15.494 mm; B:20.622 mm; R - Cone Backface To Clear Radius1:3.560 mm; r - Cup Backface To Clear Radius2:1.52 mm; da - Cone Frontface Backing Diameter:44.96 mm; db - Cone Backface Backing Diameter:52.07 mm; Da - Cup Frontface Backing Diameter:71.88 mm; Db - Cup Backface Backing Diameter:68.07 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Aa - Cage-Cone Backface Clearance:1.5 mm; a - Effective Center Location3:-4.8 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3700 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:14300 lbf; C0 - Static Radial Rating:15500 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2550 lbf; K - Factor7:1.45; e - ISO Factor8:0.4; Y - ISO Factor9:1.49; G1 - Heat Generation Factor (Roller-Raceway):20.7; G2 - Heat Generation Factor (Rib-Roller End):12.5; Cg - Geometry Factor:0.0709; |
INA 89438-M thrust roller bearings | Series:28000; Cone Part Number:28159; Cup Part Number:28300X; Design Units:Imperial; Bearing Weight:0.4 Kg; Cage Type:Stamped Steel; d:39.980 mm; D:76.2 mm; B - Cone Width:20.940 mm; C - Cup Width:15.494 mm; B:20.622 mm; R - Cone Backface To Clear Radius1:3.560 mm; r - Cup Backface To Clear Radius2:1.52 mm; da - Cone Frontface Backing Diameter:44.96 mm; db - Cone Backface Backing Diameter:52.07 mm; Da - Cup Frontface Backing Diameter:71.88 mm; Db - Cup Backface Backing Diameter:68.07 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Aa - Cage-Cone Backface Clearance:1.5 mm; a - Effective Center Location3:-4.8 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3700 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:14300 lbf; C0 - Static Radial Rating:15500 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2550 lbf; K - Factor7:1.45; e - ISO Factor8:0.4; Y - ISO Factor9:1.49; G1 - Heat Generation Factor (Roller-Raceway):20.7; G2 - Heat Generation Factor (Rib-Roller End):12.5; Cg - Geometry Factor:0.0709; |
Timken T600W thrust roller bearings | Series:28000; Cone Part Number:28159; Cup Part Number:28300X; Design Units:Imperial; Bearing Weight:0.4 Kg; Cage Type:Stamped Steel; d:39.980 mm; D:76.2 mm; B - Cone Width:20.940 mm; C - Cup Width:15.494 mm; B:20.622 mm; R - Cone Backface To Clear Radius1:3.560 mm; r - Cup Backface To Clear Radius2:1.52 mm; da - Cone Frontface Backing Diameter:44.96 mm; db - Cone Backface Backing Diameter:52.07 mm; Da - Cup Frontface Backing Diameter:71.88 mm; Db - Cup Backface Backing Diameter:68.07 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Aa - Cage-Cone Backface Clearance:1.5 mm; a - Effective Center Location3:-4.8 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3700 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:14300 lbf; C0 - Static Radial Rating:15500 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2550 lbf; K - Factor7:1.45; e - ISO Factor8:0.4; Y - ISO Factor9:1.49; G1 - Heat Generation Factor (Roller-Raceway):20.7; G2 - Heat Generation Factor (Rib-Roller End):12.5; Cg - Geometry Factor:0.0709; |
INA 292/1000-E1-MB thrust roller bearings | Series:28000; Cone Part Number:28159; Cup Part Number:28300X; Design Units:Imperial; Bearing Weight:0.4 Kg; Cage Type:Stamped Steel; d:39.980 mm; D:76.2 mm; B - Cone Width:20.940 mm; C - Cup Width:15.494 mm; B:20.622 mm; R - Cone Backface To Clear Radius1:3.560 mm; r - Cup Backface To Clear Radius2:1.52 mm; da - Cone Frontface Backing Diameter:44.96 mm; db - Cone Backface Backing Diameter:52.07 mm; Da - Cup Frontface Backing Diameter:71.88 mm; Db - Cup Backface Backing Diameter:68.07 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Aa - Cage-Cone Backface Clearance:1.5 mm; a - Effective Center Location3:-4.8 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3700 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:14300 lbf; C0 - Static Radial Rating:15500 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2550 lbf; K - Factor7:1.45; e - ISO Factor8:0.4; Y - ISO Factor9:1.49; G1 - Heat Generation Factor (Roller-Raceway):20.7; G2 - Heat Generation Factor (Rib-Roller End):12.5; Cg - Geometry Factor:0.0709; |
Timken K.81110LPB thrust roller bearings | Series:28000; Cone Part Number:28159; Cup Part Number:28300X; Design Units:Imperial; Bearing Weight:0.4 Kg; Cage Type:Stamped Steel; d:39.980 mm; D:76.2 mm; B - Cone Width:20.940 mm; C - Cup Width:15.494 mm; B:20.622 mm; R - Cone Backface To Clear Radius1:3.560 mm; r - Cup Backface To Clear Radius2:1.52 mm; da - Cone Frontface Backing Diameter:44.96 mm; db - Cone Backface Backing Diameter:52.07 mm; Da - Cup Frontface Backing Diameter:71.88 mm; Db - Cup Backface Backing Diameter:68.07 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Aa - Cage-Cone Backface Clearance:1.5 mm; a - Effective Center Location3:-4.8 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3700 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:14300 lbf; C0 - Static Radial Rating:15500 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2550 lbf; K - Factor7:1.45; e - ISO Factor8:0.4; Y - ISO Factor9:1.49; G1 - Heat Generation Factor (Roller-Raceway):20.7; G2 - Heat Generation Factor (Rib-Roller End):12.5; Cg - Geometry Factor:0.0709; |
100 mm x 150 mm x 20 mm IKO CRBC 10020 UU thrust roller bearings | Series:28000; Cone Part Number:28159; Cup Part Number:28300X; Design Units:Imperial; Bearing Weight:0.4 Kg; Cage Type:Stamped Steel; d:39.980 mm; D:76.2 mm; B - Cone Width:20.940 mm; C - Cup Width:15.494 mm; B:20.622 mm; R - Cone Backface To Clear Radius1:3.560 mm; r - Cup Backface To Clear Radius2:1.52 mm; da - Cone Frontface Backing Diameter:44.96 mm; db - Cone Backface Backing Diameter:52.07 mm; Da - Cup Frontface Backing Diameter:71.88 mm; Db - Cup Backface Backing Diameter:68.07 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Aa - Cage-Cone Backface Clearance:1.5 mm; a - Effective Center Location3:-4.8 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3700 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:14300 lbf; C0 - Static Radial Rating:15500 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2550 lbf; K - Factor7:1.45; e - ISO Factor8:0.4; Y - ISO Factor9:1.49; G1 - Heat Generation Factor (Roller-Raceway):20.7; G2 - Heat Generation Factor (Rib-Roller End):12.5; Cg - Geometry Factor:0.0709; |
ISO 81109 thrust roller bearings | Series:28000; Cone Part Number:28159; Cup Part Number:28300X; Design Units:Imperial; Bearing Weight:0.4 Kg; Cage Type:Stamped Steel; d:39.980 mm; D:76.2 mm; B - Cone Width:20.940 mm; C - Cup Width:15.494 mm; B:20.622 mm; R - Cone Backface To Clear Radius1:3.560 mm; r - Cup Backface To Clear Radius2:1.52 mm; da - Cone Frontface Backing Diameter:44.96 mm; db - Cone Backface Backing Diameter:52.07 mm; Da - Cup Frontface Backing Diameter:71.88 mm; Db - Cup Backface Backing Diameter:68.07 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Aa - Cage-Cone Backface Clearance:1.5 mm; a - Effective Center Location3:-4.8 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3700 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:14300 lbf; C0 - Static Radial Rating:15500 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2550 lbf; K - Factor7:1.45; e - ISO Factor8:0.4; Y - ISO Factor9:1.49; G1 - Heat Generation Factor (Roller-Raceway):20.7; G2 - Heat Generation Factor (Rib-Roller End):12.5; Cg - Geometry Factor:0.0709; |
710 mm x 1220 mm x 199 mm SKF 294/710EF thrust roller bearings | Series:28000; Cone Part Number:28159; Cup Part Number:28300X; Design Units:Imperial; Bearing Weight:0.4 Kg; Cage Type:Stamped Steel; d:39.980 mm; D:76.2 mm; B - Cone Width:20.940 mm; C - Cup Width:15.494 mm; B:20.622 mm; R - Cone Backface To Clear Radius1:3.560 mm; r - Cup Backface To Clear Radius2:1.52 mm; da - Cone Frontface Backing Diameter:44.96 mm; db - Cone Backface Backing Diameter:52.07 mm; Da - Cup Frontface Backing Diameter:71.88 mm; Db - Cup Backface Backing Diameter:68.07 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Aa - Cage-Cone Backface Clearance:1.5 mm; a - Effective Center Location3:-4.8 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3700 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:14300 lbf; C0 - Static Radial Rating:15500 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2550 lbf; K - Factor7:1.45; e - ISO Factor8:0.4; Y - ISO Factor9:1.49; G1 - Heat Generation Factor (Roller-Raceway):20.7; G2 - Heat Generation Factor (Rib-Roller End):12.5; Cg - Geometry Factor:0.0709; |
FAG 29424-E1 thrust roller bearings Video
Axial spherical roller bearings - 29424-E1-XL - medias
29424-E1-XL. Axial spherical roller bearings main dimensions to DIN 728/ISO 104, single direction, separable. Send to shopping basket. Axial spherical roller
FAG 29424-E1 bearings
FAG 29424-E1 bearings available immediately at your doorstep on order and you don't need to rush to any store. Rolls Bearing Limited providing you the
FAG Bearings SPHERICAL ROLLER THRUST BEARINGS
FAG Bearings SPHERICAL ROLLER THRUST BEARINGS (29424-E1): Amazon.com: Industrial & Scientific
29424-E1 - FAG Spherical Roller Thrust - Quality Bearings
Product: 29424-E1 | Brand: FAG | Size: 120x250x78mm | In Stock | Same Day Despatch | All Orders Shipped via DHL | Quality Bearings Online
29424-E1 - medias - Schaeffler
We are continually developing INA and FAG products further - for your benefit. Unfortunately you have found a link on the Internet that refers to a obsolete
FAG | 29424-E1-XL | Thrust Spherical Roller Bearing | Applied
Shop FAG 29424-E1-XL at Applied.com, which includes; Thrust Bearing Type, 120 mm Inner Diameter, 250 mm Outer Diameter, 78 mm Width
FAG (Schaeffler) - 29424-E1 - Motion Industries
Buy FAG (Schaeffler) Spherical Roller Thrust Bearings 29424-E1 direct from Motion Industries. Your proven service leader with reliable delivery since 1972