| d1 ≈ | 28.2 mm |
| Calculation factor f0 | 13 |
| B | 31 mm |
| r1,2 min. | 0.6 mm |
| d | 19.05 mm |
| Basic dynamic load rating C | 10.8 kN |
| Basic static load rating C0 | 6.55 kN |
| Mass complete bearing | 0.16 kg |
| Limiting speed1) | 5000 r/min |
| D | 47 mm |
| Recommended tightening torque for grub screw | 4 N·m |
| B4 | 4.5 mm |
| C | 14 mm |
| s1 | 18.3 mm |
| Hexagonal key size for grub screw N | 3.175 mm |
| Thread grub screw G2 | 1/4-28 UNF |
| Fatigue load limit Pu | 0.28 kN |
Compare HS71904-E-T-P4S FAG high precision bearings | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | d | C | D | a | B | D6 | f0 | C0 |
| S71904 CE/P4A | SKF | 20 mm | - | 37 mm | 8.5 mm | 9 mm | - | - | - |
| S71904 ACD/HCP4A | SKF | 20 mm | 5,72 kN | 37 mm | 11.2 mm | 9 mm | - | - | 3,05 kN |
| S71904 ACD/P4A | SKF | 20 mm | - | 37 mm | 11.2 mm | 9 mm | - | - | - |
| S71904 ACE/HCP4A | SKF | 20 mm | - | 37 mm | 11.6 mm | 9 mm | - | - | - |
| S71904 ACE/P4A | SKF | 20 mm | - | 37 mm | 11.6 mm | 9 mm | - | - | - |
| S71904 CD/HCP4A | SKF | 20 mm | - | 37 mm | 8.4 mm | 9 mm | - | - | - |
| S71904 CD/P4A | SKF | 20 mm | - | 37 mm | 8.4 mm | 9 mm | - | - | - |
| S71904 CE/HCP4A | SKF | 20 mm | - | 37 mm | 8.5 mm | 9 mm | - | - | - |
| MLE71904CVDUJ74S | SNR | 20 mm | 18 mm | 37 mm | - | 18 mm | - | - | - |
| MLE71904CVUJ74S | SNR | 20 mm | 9 mm | 37 mm | 9 mm | 9 mm | 26.6 mm | 7.88 | - |
| MLE71904HVDUJ74S | SNR | 20 mm | 18 mm | 37 mm | - | 18 mm | - | - | - |
| BAX170-F-T-P4S-DBL FAG high precision bearings | d:2.3750 in; lubrication type:Cannot Be Relubricat; length through bore:81.6 mm; radial static load capacity:8000 lb; D:6.8750 in; expansion type:Non-Expansion Bearin; mounting type:Four-Bolt Flange; replacement bearing:G1206KRRB; bore type:Round; maximum rpm:2470 RPM; series:RCJ; radial dynamic loa |
| BAX150-H-T-P4S-DBL FAG high precision bearings | overall length:125 mm; housing material:PBT Thermoplastic; slot width:13.5 mm; slot spacing:62 mm; locking device:Set Screw; manufacturer product page:Click here; lubrication type:Lubrication Fitting; overall height:102 mm; dynamic load capacity:1700 kgf; series:MUCWTPL200B; unit type:Side Mount; se |
| BAX150-F-T-P4S-DBL FAG precision ball bearings | precision rating:Not Rated; static load capacity:1490 lbf; operating temperature range:Maximum of +250; lubrication hole type:No Hole; B:12 mm; maximum rpm:30000 RPM; d:9 mm; compatible inner ring:JR6x9x12; standards met:ANSI/ABMA 18.1,; dynamic load capacity:1270 lbf; closure type:Open; d |
| BAX190-H-T-P4S-DBL FAG high precision bearings | expansion type:Expansion Bearing &#; housing construction:Solid Pillow Block; overall length:15.0000 in; bearing type:Spherical Roller; base to bore centerline:4.0000 in; D:11-1/2 in; housing material:Cast Iron; mounting:Four-Bolt Base; B:5-9/64 in; standards met:ANSI/ABMA STD 9; fini |
| BAX130-H-T-P4S-DBL FAG precision ball bearings | mounting:Two-Bolt Base; locking device:Adapter Mount; bearing type:Spherical Roller; seal type:Felt Seal; housing material:Ductile Iron; lubrication type:Lubrication Fitting; series:USRB 5000; base width:2.1875 in; housing construction:Solid Pillow Block; B:3.5469 in; overall height:4.3750 in; D:6.2 |
| BAX200-H-T-P4S-DBL FAG high precision bearings | series:STD; overall height:8 in; expansion type:Expansion Bearing &#; base to bore centerline:3-3/4 in; D:9-1/8 to 9-7&#x; housing material:Cast Iron; base width:3-1/2 in; mounting:Two-Bolt Base; overall length:12-1/2 in; standards met:UL, AFBMA, AGMA, ASM; B:9-1/4 in; d:2-3 |
| BAX180-H-T-P4S-DBL FAG precision ball bearings | standards met:SAE 863, FC-2000-K30; material:Oil-Impregnated Bron; groove/plug type:None; overall length:5 in; D:2-7/8 in; d:1-1/4 in; operating temperature range:-15 °F to +; maximum pv value:35000; material specification:Super Oilite®, S; maximum v value:225 (sfm); |
| BAX170-H-T-P4S-DBL FAG high precision bearings | Dynamic Load Rating (kN):3070; Static Load Rating (kN):5110; Reference Speed Rating (r/min):830; Limiting Speed Rating (r/min):710; Availability:In Stock; D:560mm; B:135mm; Weight:112.00 KGS; Cage Type:Steel; Clearance:Standard; SKU:23076ejw507c08-timke; Seals or Shields:Open Type; d:380mm; |
| BAX120-H-T-P4S-DBL FAG high precision ball bearings | Availability:In Stock; Dynamic Load Rating (kN):18.2; B:14mm; Cage Type:Plastic; Weight:0.02 KGS; Clearance:Standard; d:35mm; D:62mm; Oil Limiting Speed (r/min):31000; Seals or Shields:Open Type; Grease Limiting Speed (r/min):20700; Preload:Light; SKU:7007a5trsulp3-nsk; Static Load Rating (kN):13; |
| BAX140-F-T-P4S-DBL FAG high precision bearings | Limiting Speed Rating (r/min):1100; d:280mm; Weight:51.00 KGS; Seals or Shields:Open Type; B:106mm; D:420mm; Clearance:C3; SKU:23056embw507c08c3-ti; Availability:In Stock; Cage Type:Brass; Dynamic Load Rating (kN):1820; Reference Speed Rating (r/min):1300; Static Load Rating (kN):2810; |
| BAX180-F-T-P4S-DBL FAG high precision ball bearings | expansion type:Non-Expansion Bearin; overall length:16.7500 in; seal type:Labyrinth; finish/coating:Black Oxide; radial dynamic load capacity:5500 lb; locking device:Concentric Collar; housing construction:Split Pillow Block; maximum rpm:1250 RPM; base to bore centerline:5.5000 in; bearing type:Tape |
| BAX140-H-T-P4S-DBL FAG high precision ball bearings | D:900 mm; da min.:702 mm; Basic dynamic load rating C:55000 kN; α:3 °; Da min.:776 mm; Sealing solution:Double-lip seals; Da max.:853 mm; Specific static load factor K0:500 N/mm²; B:308 mm; Lubricant:Maintenance free &nd; r2 min.:6 mm; Specific dynamic load factor K:300 N/mm²; da max.: |
| BAX160-F-T-P4S-DBL FAG precision ball bearings | inside diameter:1.7700 in; B:0.1250 in; material:Steel; D:2.0800 in; |
| BAX160-H-T-P4S-DBL FAG precision ball bearings | number of rings required:1; bearing type:Spherical Roller; material:Steel; D:140 mm; compatible bearing:222S.211, 22216-E1-K; B:10 mm; compatible housed unit:SAF516C.U, SAF516D.U; |
| BAX200-F-T-P4S-DBL FAG high precision bearings | D:11/16 in; bearing material:Sintered Bronze Oil-; iso grade:9001:2008 &; sleeve bearing type:Flanged Bearing; d:3/8 in; material specification:CT-1000-K26, SAE841; D:1/2 in; standards met:RoHS, REACH, DRC Con; harmonization code:848330; overall length:20 mm; series:BSF; flan |
| BAX190-F-T-P4S-DBL FAG precision ball bearings | mounting type:Four-Bolt Piloted; expansion type:Non-Expansion Bearin; manufacturer upc number:8865590369843; overall height:3.0827 in; replacement bearing:UC215-47; B:8.8594 in; seal type:R-Seal; bore type:Round; housing material:Cast Iron; d:2.9375 in; bolt size:0.6250 in; locking device:Set Screw; |
HS71904-E-T-P4S FAG high precision bearings Video
Super Precision Bearings - Schaeffler
brands INA and FAG have been at the forefront of the world market for decades. FAG Super Precision Bearings for main spindles represent ... HS71904-E-T-P4S
FAG HS71904-E-T-P4S bearing
Original FAG HS71904-E-T-P4S bearing. 20x37x9. Nodes bearings have FAG HS71904-E-T-P4S bearings in stock, precision spindle bearing, in pairs or sets,
FAG | HS71904-E-T-P4S-UL | Single Row Angular Contact Spindle
Shop FAG HS71904-E-T-P4S-UL at Applied.com, which includes; Round Bore, Metric Type, Single Row Angular Contact Bearing Type, 20 mm Inside Diameter,
FAG High precision angular contact bearing HS71904-E-T-P4S-UL
Find your High precision angular contact bearing HS71904-E-T-P4S-UL at ERIKS. Choose from more than 500.000 products online and order right away
Bearing HS71904-E-T-P4S (FAG) | Size and Specification
Spindle bearings HS71904-E-T-P4S. Bearing number : HS71904-E-T-P4S. Size (mm) : 20x37x9. Brand : FAG. Bore Diameter (mm) : 20. Outer Diameter (mm) :
HS71904-E-T-P4S-UL FAG • ABF Store
HS71904-E-T-P4S-UL FAG available at ABF.store ✓ Same-day shipment ✓ 8.000.000 bearings and electric motors ✓ Worldwide delivery ✓ Customer Service in
FAG HS71904-E-T-P4S spindle bearings | 20x37x9mm
Nodes bearings have FAG HS71904-E-T-P4S bearings in stock, precision spindle bearing, in pairs or sets, contact angle α = 25°, HS71904-E-T-P4S bearings