deep groove ball bearings
Deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speedsGood radial load capacityAcceptable axial load capacity in both direction.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- Toyana Bo15 deep groove ball bearings
- 3.1875 in
- 3.7500 in
- 25 mm x 52 mm x 21,4 mm NKE GRAE25-NPPB deep groove ball bearings
- 2.4375 in
- 2.7000 in
- AST F689H-2RS deep groove ball bearings
- 1/4"
- 1200 (sfm)
- 15 mm x 42 mm x 13 mm SKF 6302-2RSL deep groove ball bearings
- Two-Bolt Base
- 4.2500 in
- 17 mm x 47 mm x 14 mm SKF E2.6303-2Z deep groove ball bearings
- 2.0000 in
- 5220 lbf
- 15 mm x 35 mm x 11 mm NACHI 6202ZENR deep groove ball bearings
- 2.5000 in
- 3.2500 in
- 4,762 mm x 12,7 mm x 3,967 mm NMB RF-3 deep groove ball bearings
- 2.5000 in
- 2.9000 in
- 15,000 mm x 35,000 mm x 15,875 mm NTN 63202ZZ deep groove ball bearings
- 8.0000 in
- 30-1/2 to 34 in
- 50 mm x 90 mm x 49,21 mm Timken GE50KPPB3 deep groove ball bearings
- Timken
- GE50KPPB3
- 10 mm x 26 mm x 8 mm NSK 6000L11-H-20 deep groove ball bearings
- 100 mm
- Maximum of +120 °C