deep groove ball bearings
Deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speedsGood radial load capacityAcceptable axial load capacity in both direction.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- 95,000 mm x 200,000 mm x 103 mm NTN UC319D1 deep groove ball bearings
- 1.7500 in
- Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary Metals Industry, Steel Industry, Aluminum Industry, Pulp and Paper Industry, Che
- 31.75 mm x 72 mm x 42,9 mm KOYO ER207-20 deep groove ball bearings
- 4.5625 in
- Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary Metals Industry, Steel Industry, Aluminum Industry, Pulp and Paper Industry, Che
- 30 mm x 80 mm x 21 mm NSK B30-120C3 deep groove ball bearings
- 70 mm
- 2.9900 in
- Toyana 6207-2RS1P deep groove ball bearings
- 1.5000 in
- 3210 lbf
- 75 mm x 95 mm x 10 mm NTN 6815 deep groove ball bearings
- 50 mm
- -65 to +392 °F
- 100 mm x 150 mm x 16 mm NTN 16020 deep groove ball bearings
- 2.0000 in
- 7/8-14
- 7 mm x 22 mm x 7 mm KOYO 3NC627YH4 deep groove ball bearings
- KOYO
- 3NC627YH4
- 9 mm x 17 mm x 5 mm SKF W 628/9-2RS1 deep groove ball bearings
- 0.88 in
- Double Seal
- 133,35 mm x 184,15 mm x 25,4 mm RHP XLJ5.1/4 deep groove ball bearings
- 3.4375 in
- 3.7500 in