plain bearings
Plain bearings, also referred to as bushes, bushings or sleeve bearings, are usually cylindrical in shape and contain no moving parts.
Standard configurations include cylindrical bearings for radial loads, flanged bearings for radial and light axial loads, thrust washers and flanged thrust washers for heavy axial loads and sliding plates of various shapes. They also can be made to custom designs, including special shapes, features (grooves, holes, notches, tabs, etc.) and dimensions.
Plain bearings are used for sliding, rotating, oscillating or reciprocating motion. In sliding applications they serve as slide bearings, bearing strips and wear plates. In these applications the sliding surfaces are usually flat, but can also be cylindrical, and movement is always linear rather than rotating. Rotating applications involve cylindrical surfaces and one or two directions of travel. Oscillating and reciprocating applications involve flat or cylindrical surfaces, but bi-directional travel.
- Toyana GE40ES plain bearings
- Two-Bolt Base
- 109.4 mm
- SKF SAL12E plain bearings
- 1.3125 in
- 5820 lbf
- AST AST650 WC16 plain bearings
- 1.2500 in
- Dual Lip with Slinger
- SKF SALKAC12M plain bearings
- 7.5000 in
- HH
- 300 mm x 430 mm x 212 mm LS GEH300XF/Q plain bearings
- Tapped Base
- 1-17/32 in
- 30 mm x 70 mm x 47 mm FBJ GEK30XS-2RS plain bearings
- 70 mm
- Labyrinth
- 200 mm x 340 mm x 74 mm ISO GW 200 plain bearings
- 2.6875 in
- 3.0000 in
- 60 mm x 65 mm x 70 mm SKF PCM 606570 M plain bearings
- 1.2500 in
- 2150 lbf
- 480 mm x 650 mm x 230 mm LS GEC480HT plain bearings
- 3.5433 in
- Powder Coat
- 420 mm x 600 mm x 300 mm LS GEH420HT plain bearings
- 30 mm
- 1830 kgf
- AST GEWZ82ES plain bearings
- 45 mm
- Open