deep groove ball bearings
Deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speedsGood radial load capacityAcceptable axial load capacity in both direction.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- 100 mm x 215 mm x 47 mm NACHI 6320 deep groove ball bearings
- 100 mm
- 2500 rpm
- 28,575 mm x 62 mm x 38,1 mm KOYO UC206-18L2 deep groove ball bearings
- 5.2500 in
- Cast Iron
- 35 mm x 55 mm x 10 mm NSK 6907L11-H-20ZZ deep groove ball bearings
- 0.9375 in
- 3150 lbf
- INA GRAE12-NPP-B deep groove ball bearings
- 2.9375 in
- Uncoated
- AST F699H-2RS deep groove ball bearings
- 25 mm
- 2170 kgf
- 10 mm x 26 mm x 8 mm FAG S6000-2RSR deep groove ball bearings
- 0.9375 in
- 1420 lbf
- 95 mm x 145 mm x 24 mm ZEN 6019-2RS deep groove ball bearings
- 2.5000 in
- 3.4063 in