deep groove ball bearings
Deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speedsGood radial load capacityAcceptable axial load capacity in both direction.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- 40 mm x 62 mm x 12 mm ZEN 61908-2Z deep groove ball bearings
- 85 mm
- 2150 lbf
- FAG UC206-17 deep groove ball bearings
- 50 mm
- 2150 lbf
- 50 mm x 110 mm x 27 mm ISB 6310-RS deep groove ball bearings
- 1.1250 in
- 2150 lbf
- INA G1200-KRR-B-AS2/V deep groove ball bearings
- 35 mm
- 2150 lbf
- 35 mm x 64 mm x 10 mm SNR AB44252S01 deep groove ball bearings
- 1 in
- Maximum of +800 °F
- 110 mm x 170 mm x 28 mm NTN 6022LLU deep groove ball bearings
- 1.1250 in
- 4410 lbf
- 35 mm x 80 mm x 21 mm NACHI 6307-2NKE9 deep groove ball bearings
- Two-Bolt Base
- 3-1/4 in
- 45 mm x 75 mm x 16 mm NSK 6009T1XZZ deep groove ball bearings
- 1.2500 in
- 2030 lbf