deep groove ball bearings
Deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speedsGood radial load capacityAcceptable axial load capacity in both direction.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- 55,5625 mm x 100 mm x 55,56 mm Timken 1203KRR deep groove ball bearings
- 1.7500 in
- 3690 lbf
- Toyana 16019 deep groove ball bearings
- 1.1875 in
- Contact with Slinger
- 300 mm x 460 mm x 50 mm KOYO 16060 deep groove ball bearings
- 20 mm
- 29 N/mm2;Static 150 N/mm2
- 1250,000 mm x 1750,000 mm x 218,000 mm NTN 60/1250 deep groove ball bearings
- 22236-e1-k-c4-qbl
- In Stock
- 50 mm x 65 mm x 7 mm NSK 6810ZZ deep groove ball bearings
- 45 mm
- 3350 kgf
- 30 mm x 72 mm x 19 mm NSK 6306T1X deep groove ball bearings
- 90 mm
- 3.4100 in
- 35 mm x 62 mm x 14 mm ISB SS 6007 deep groove ball bearings
- 0.5000 in
- 3-57/64 in
- 38.1 mm x 80 mm x 42.8 mm SKF YEL 208-108-2F deep groove ball bearings
- 2.0000 in
- 2150 lbf
- 10 mm x 35 mm x 11 mm NSK 6300NR deep groove ball bearings
- Steel
- ±0.001 in