deep groove ball bearings
Deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speedsGood radial load capacityAcceptable axial load capacity in both direction.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- 120 mm x 180 mm x 28 mm SKF 6024-RS1 deep groove ball bearings
- Four-Bolt Square
- Stainless Steel
- 12 mm x 32 mm x 10 mm NACHI 6201 deep groove ball bearings
- 1.1875 in
- 2150 lbf
- 80 mm x 170 mm x 39 mm NTN 6316ZZ deep groove ball bearings
- 2.5000 in
- 7190 lbf
- AST FR10-2RS deep groove ball bearings
- 0.6250 in
- 1079 lb
- 25,000 mm x 62,000 mm x 24,000 mm SNR 62305EE deep groove ball bearings
- bsb400duhp3-rhp
- In Stock
- 22 mm x 33,5 mm x 7 mm NTN SC04C41C2PX1/L067 deep groove ball bearings
- 1.3125 in
- 2150 lbf
- 85 mm x 150 mm x 28 mm NKE 6217-2Z deep groove ball bearings
- 2.9375 in
- Eccentric Collar
- 30 mm x 47 mm x 9 mm NSK 6906DDU deep groove ball bearings
- 1.5000 in
- 3210 lbf
- 12 inch x 355,6 mm x 25,4 mm INA CSXG120 deep groove ball bearings
- 1.5000 in
- 2150 lbf