deep groove ball bearings
Deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speedsGood radial load capacityAcceptable axial load capacity in both direction.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- 120 mm x 215 mm x 40 mm SKF 6224 deep groove ball bearings
- Side Mount
- Lubrication Fitting
- 300 mm x 460 mm x 74 mm KOYO 6060 deep groove ball bearings
- 3.2500 in
- Uncoated
- 110 mm x 140 mm x 16 mm NSK 6822VV deep groove ball bearings
- 1.1875 in
- 4410 lbf
- 300 mm x 540 mm x 85 mm NACHI 6260 deep groove ball bearings
- 1.9375 in
- 5-11/16 in
- 150 mm x 270 mm x 45 mm CYSD 6230-RS deep groove ball bearings
- 0.6250 in
- 1000 lb
- 45,000 mm x 85,000 mm x 19,000 mm NTN 6209LLBNR deep groove ball bearings
- 2.9375 in
- 3.3800 in
- 25 mm x 47 mm x 12 mm CYSD 6005-RS deep groove ball bearings
- 0.1900 in
- 200 lb
- 70 mm x 125 mm x 24 mm KOYO 6214 deep groove ball bearings
- Steel
- ±0.001 in
- 5 mm x 16 mm x 5 mm PFI 625-2RS C3 deep groove ball bearings
- 1.4375 in
- 7980 lbf
- 170,000 mm x 260,000 mm x 42,000 mm SNR 6034M deep groove ball bearings
- 1.4375 in
- Cast Iron