deep groove ball bearings
Deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speedsGood radial load capacityAcceptable axial load capacity in both direction.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- SNR AB40566 deep groove ball bearings
- 0.2500 in
- 320 lb
- 5 mm x 10 mm x 3 mm NSK MF105 deep groove ball bearings
- 1.7500 in
- Steel
- 45 mm x 85 mm x 19 mm SKF 209-Z deep groove ball bearings
- 3.8750 in
- 0.03 in
- 20 mm x 52 mm x 12 mm NTN SC04A47 deep groove ball bearings
- 2.4375 in
- 2.7000 in
- Toyana 6304 deep groove ball bearings
- 160 mm
- KM36
- 25 mm x 62 mm x 12 mm PFI 98305 C3 deep groove ball bearings
- 2.9375 in
- 3.0000 in
- 45 mm x 55 mm x 6 mm ZEN 61709-2Z deep groove ball bearings
- 0.6250 in
- Double Shielded
- 35 mm x 80 mm x 21 mm CYSD 6307 deep groove ball bearings
- 0.3125 in
- 7500 lb
- 28 mm x 58 mm x 16 mm NSK 62/28 deep groove ball bearings
- 3.5429 in
- Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary Metals Industry, Steel Industry, Aluminum Industry, Pulp and Paper Industry, Che
- INA GRAE20-NPP-B-FA125.5 deep groove ball bearings
- 0.6250 in
- 1000 lb
- 9 mm x 20 mm x 6 mm ZEN F699-2Z deep groove ball bearings
- 0.2500 in
- 5370 lb
- 65 mm x 90 mm x 13 mm SKF 61913-2RS1 deep groove ball bearings
- 120 mm
- Thrust Washer