deep groove ball bearings
Deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speedsGood radial load capacityAcceptable axial load capacity in both direction.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- 17 mm x 26 mm x 5 mm SKF W 61803 deep groove ball bearings
- 1.5000 in
- 1-31/32 in
- Toyana 62/28 deep groove ball bearings
- 45 mm
- 3350 kgf
- 24 mm x 62 mm x 17 mm SNR AB12533 deep groove ball bearings
- Two-Bolt Base
- Uncoated
- 70 mm x 110 mm x 13 mm ZEN 16014 deep groove ball bearings
- 50 mm
- 6300 kgf
- 170,000 mm x 230,000 mm x 28,000 mm NTN 6934ZZ deep groove ball bearings
- 2.7500 in
- Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary Metals Industry, Steel Industry, Aluminum Industry, Pulp and Paper Industry, Che
- 35 mm x 62 mm x 14 mm SKF 6007-RZ deep groove ball bearings
- 5/8 in
- CT-1000-K26, SAE841
- 15 mm x 42 mm x 17 mm FBJ 4302-2RS deep groove ball bearings
- 2-1/4 in
- 50000
- 180 mm x 260 mm x 34 mm NSK B180-2 deep groove ball bearings
- 1.4375 in
- 5820 lbf
- 50 mm x 80 mm x 16 mm ZEN 6010-2Z deep groove ball bearings
- Wear Plate
- Dry 24.5;Dry Static 73.5;Periodic Lubrication 49;Periodic Lube Static 73.5 N/mm2Dry 24.5;Dry Static 73.5;Periodic Lubrication 49;Periodic Lube St
- 17 mm x 40 mm x 12 mm NSK 6203NR deep groove ball bearings
- 75 mm
- 11600 kgf
- 20 mm x 52 mm x 22,2 mm CYSD W6304-2RSNR deep groove ball bearings
- 1/2 in
- Maximum of +800 °F
- Toyana UC210 deep groove ball bearings
- 3/8 in
- Maximum of +800 °F