deep groove ball bearings
Deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speedsGood radial load capacityAcceptable axial load capacity in both direction.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- 17 mm x 62 mm x 17,6 mm FAG 546065 deep groove ball bearings
- 1.6875 in
- 5139 lb
- 35,000 mm x 62,000 mm x 14,000 mm NTN 6007C deep groove ball bearings
- 0.6250 in
- 1000 lb
- 15 mm x 32 mm x 9 mm NSK 6002L11DDU deep groove ball bearings
- 0.3750 in
- 9570 lb
- 55 mm x 90 mm x 18 mm SKF 6011/HR11QN deep groove ball bearings
- 2.2500 in
- Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary Metals Industry, Steel Industry, Aluminum Industry, Pulp and Paper Industry, Che
- FAG UC208 deep groove ball bearings
- 2.5500 in
- Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary Metals Industry, Steel Industry, Aluminum Industry, Pulp and Paper Industry, Che
- 3 mm x 9 mm x 4 mm NTN WBC3-9ZA deep groove ball bearings
- 1.8750 in
- 13900 lbf
- Toyana UC321 deep groove ball bearings
- Toyana
- UC321
- 75 mm x 105 mm x 16 mm NTN 6915ZZ deep groove ball bearings
- 24 in
- 2-15/16 in
- 50 mm x 110 mm x 27 mm SKF 310 deep groove ball bearings
- 3.1875 in
- Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary Metals Industry, Steel Industry, Aluminum Industry, Pulp and Paper Industry, Che
- Toyana 6313-2RS deep groove ball bearings
- 0.7500 in
- Sealed