plain bearings
Plain bearings, also referred to as bushes, bushings or sleeve bearings, are usually cylindrical in shape and contain no moving parts.
Standard configurations include cylindrical bearings for radial loads, flanged bearings for radial and light axial loads, thrust washers and flanged thrust washers for heavy axial loads and sliding plates of various shapes. They also can be made to custom designs, including special shapes, features (grooves, holes, notches, tabs, etc.) and dimensions.
Plain bearings are used for sliding, rotating, oscillating or reciprocating motion. In sliding applications they serve as slide bearings, bearing strips and wear plates. In these applications the sliding surfaces are usually flat, but can also be cylindrical, and movement is always linear rather than rotating. Rotating applications involve cylindrical surfaces and one or two directions of travel. Oscillating and reciprocating applications involve flat or cylindrical surfaces, but bi-directional travel.
- 12,7 mm x 15,081 mm x 9,525 mm SKF PCZ 0806 E plain bearings
- 0.5000 in
- 7/8 in
- 180 mm x 320 mm x 70 mm ISO GW 180 plain bearings
- 1.3750 in
- 3.6250 in
- 40 mm x 62 mm x 28 mm SKF GE 40 ES plain bearings
- SKF
- GE 40 ES
- AST GEGZ69ES plain bearings
- 0.2500 in
- 320 lb
- INA GE40-LO plain bearings
- 16 mm
- Open
- AST AST850SM 8080 plain bearings
- 1.8750 in
- 13900 lbf
- 60 mm x 70 mm x 60 mm INA ZGB 60X70X60 plain bearings
- 6.0000 in
- 7.3430 in
- 15 mm x 26 mm x 12 mm ISO GE 015 ES-2RS plain bearings
- 25 mm
- 14.6 kN
- 17 mm x 32 mm x 14 mm ISO GE 017 XES plain bearings
- 0.3125 in
- 7500 lb
- 260 mm x 430 mm x 95 mm LS GX260T plain bearings
- 1 in
- Maximum of +800 °F
- SKF SIJ60ES plain bearings
- 45 mm
- 2150 lbf