plain bearings
Plain bearings, also referred to as bushes, bushings or sleeve bearings, are usually cylindrical in shape and contain no moving parts.
Standard configurations include cylindrical bearings for radial loads, flanged bearings for radial and light axial loads, thrust washers and flanged thrust washers for heavy axial loads and sliding plates of various shapes. They also can be made to custom designs, including special shapes, features (grooves, holes, notches, tabs, etc.) and dimensions.
Plain bearings are used for sliding, rotating, oscillating or reciprocating motion. In sliding applications they serve as slide bearings, bearing strips and wear plates. In these applications the sliding surfaces are usually flat, but can also be cylindrical, and movement is always linear rather than rotating. Rotating applications involve cylindrical surfaces and one or two directions of travel. Oscillating and reciprocating applications involve flat or cylindrical surfaces, but bi-directional travel.
- ISB TSF.R 10.1 plain bearings
- Two-Bolt Base
- Uncoated
- LS SIZP15N plain bearings
- 0.9375 in
- 3150 lbf
- 80 mm x 85 mm x 60 mm INA EGB8060-E40 plain bearings
- Two-Bolt Base
- 3-7/16 in
- 20 mm x 35 mm x 20 mm FBJ GEEW20ES-2RS plain bearings
- 1.6250 in
- Cast Iron
- AST AST090 3530 plain bearings
- 4.5000 in
- 4.7500 in
- 90 mm x 130 mm x 60 mm FBJ GE90ES plain bearings
- 3.2500 in
- 18700 lbf
- 12 mm x 22 mm x 11 mm IKO SB 12A plain bearings
- 0.1900 in
- 200 lb
- 82.55 mm x 139.7 mm x 82.931 mm SKF GEZH 304 ES plain bearings
- 3.2500 in
- 18700 lbf
- AST ASTT90 1810 plain bearings
- 1.4375 in
- 5820 lbf
- LS SAJK18C plain bearings
- 0.4375 in
- 5689 lbs
- 130 mm x 200 mm x 42 mm Timken GE130SX plain bearings
- Bearing Parts Kit
- 1/8 in