deep groove ball bearings
Deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speedsGood radial load capacityAcceptable axial load capacity in both direction.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- 80 mm x 100 mm x 10 mm FAG 61816-2RSR-Y deep groove ball bearings
- 2.1666 in
- Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary Metals Industry, Steel Industry, Aluminum Industry, Pulp and Paper Industry, Che
- 5 mm x 13 mm x 4 mm NSK F695 deep groove ball bearings
- Four-Bolt Base
- 52100/Black Oxide
- 40 mm x 62 mm x 12 mm NACHI 6908 deep groove ball bearings
- 1.2500 in
- 3750 lbf
- 45 mm x 75 mm x 16 mm ISB 6009 N deep groove ball bearings
- 0.7500 in
- 2150 lbf
- AST 692HZZ deep groove ball bearings
- 1.1875 in
- 3750 lbf
- 240 mm x 320 mm x 38 mm ISO 61948 deep groove ball bearings
- 1.4375 in
- 5820 lbf
- 15 mm x 40 mm x 22 mm NKE GAY15-NPPB deep groove ball bearings
- 1.5000 in
- 2150 lbf
- 17 mm x 42 mm x 12 mm NTN TM-SC0346 deep groove ball bearings
- 2.2500 in
- Slotted
- 35 mm x 100 mm x 25 mm ISB 6407 NR deep groove ball bearings
- 3.8125 in
- 0.09 in
- 85 mm x 180 mm x 41 mm ISO 6317 deep groove ball bearings
- 170 mm
- Galvanized Steel
- 20 mm x 32 mm x 12 mm ZEN P6004-GB deep groove ball bearings
- 1.0000 in
- 2680 lbf