deep groove ball bearings
Deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speedsGood radial load capacityAcceptable axial load capacity in both direction.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- 10 mm x 19 mm x 6 mm ZEN 62800-2RS deep groove ball bearings
- 1.4375 in
- 2 in
- 44,45 mm x 95,25 mm x 20,6375 mm RHP LJ1.3/4-2RS deep groove ball bearings
- mr106-2z-zen
- In Stock
- 10 mm x 30 mm x 9 mm ZEN 6200-2RS deep groove ball bearings
- 1.2500 in
- 7530 lbf
- 320 mm x 440 mm x 56 mm ZEN 61964 deep groove ball bearings
- 30 mm
- 148.1 mm
- 25 mm x 47 mm x 12 mm NACHI 6005 deep groove ball bearings
- 6.1870 in
- Open
- 55 mm x 80 mm x 13 mm NSK 6911DDU deep groove ball bearings
- 0.8750 in
- 3150 lbf
- 74.613 mm x 130 mm x 73.3 mm SKF YAR 215-215-2FW/VA228 deep groove ball bearings
- 3/4 in
- -35 °F to +300 °F
- 15 mm x 24 mm x 5 mm ISB 61802-ZZ deep groove ball bearings
- 2.9375 in
- 3-3/16 in