deep groove ball bearings
Deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speedsGood radial load capacityAcceptable axial load capacity in both direction.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- 8 mm x 24 mm x 8 mm ISO 628 deep groove ball bearings
- 1.3125 in
- 5820 lbf
- 30,1625 mm x 62 mm x 30 mm KOYO SB206-19 deep groove ball bearings
- 1.2500 in
- 2150 lbf
- 10,000 mm x 26,000 mm x 8,000 mm SNR 6000FT150 deep groove ball bearings
- 14 mm
- Dry 1.65, Periodic Lubrication 3.25 N/mm2 x m/s
- AST SR4A deep groove ball bearings
- 1.4375 in
- 2150 lbf
- 9 mm x 20 mm x 6 mm KOYO 699 deep groove ball bearings
- Bearing Rebuild Kit
- B400L
- 28,575 mm x 71,4375 mm x 20,6375 mm RHP MJ1.1/8-Z deep groove ball bearings
- 1.8750 in
- 4180 lbf
- Toyana 62310-2RS deep groove ball bearings
- 1.4375 in
- 2 in
- 4 mm x 11 mm x 4 mm SKF W619/4 deep groove ball bearings
- Single Joint
- 1.3400 in
- 130,000 mm x 230,000 mm x 40,000 mm NTN 6226LLU deep groove ball bearings
- 1.3750 in
- 4-59/64 in
- 17 mm x 47 mm x 14 mm SKF 6303/HR11TN deep groove ball bearings
- 1.7500 in
- 11570 lbf
- 35 mm x 80 mm x 49,2 mm KOYO UCX07 deep groove ball bearings
- 60 mm
- 5350 kgf
- 22 mm x 44 mm x 12 mm ISO 60/22 deep groove ball bearings
- 1.3125 in
- 2150 lbf