deep groove ball bearings
Deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speedsGood radial load capacityAcceptable axial load capacity in both direction.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
- 60 mm x 110 mm x 22 mm NKE 6212-2Z-N deep groove ball bearings
- 0.5000 in
- 1-1/2 in
- Toyana 4202 deep groove ball bearings
- 2.0000 in
- 5220 lbf
- 120,000 mm x 180,000 mm x 28,000 mm NTN-SNR 6024NR deep groove ball bearings
- 3.2500 in
- 34400 lbf
- 7 mm x 14 mm x 5 mm ISB SS 628/7-ZZ deep groove ball bearings
- 2.0000 in
- 2-3/4 in
- 60 mm x 95 mm x 11 mm ISO 16012 deep groove ball bearings
- 7219cydu/glp4-nachi
- In Stock
- 80,000 mm x 140,000 mm x 33,000 mm SNR 4216A deep groove ball bearings
- 227.012 mm
- 359.999 mm
- 25 mm x 47 mm x 8 mm FBJ 16005 deep groove ball bearings
- 2.0000 in
- 2150 lbf
- 70,000 mm x 125,000 mm x 24,000 mm NTN 6214ZZNR deep groove ball bearings
- 0.8750 in
- 5820 lbf
- 17 mm x 40 mm x 19,1 mm SKF YET203 deep groove ball bearings
- 1.3750 in
- 2150 lbf
- 32 mm x 65 mm x 17 mm ISO 62/32-2RS deep groove ball bearings
- 4.0000 in
- Steel